ELECTRIC HEAT AND CONDENSATION
Electrically heated homes (baseboard electric heat, not to be confused with "heat pumps" that blow warm air) may experience a higher level of indoor humidity because of a lack of air movement - there is no furnace or air handler blowing air, nor drawing fresh (combustion) air into the home. These homes have lower rates of air exchange. Also, since the heat is only dispersed primarily through
natural convection it's dispersal can be uneven. The uneven heating through an electric heater can cause cool spots to occur, possibly dropping temperatures to below dew point at some areas, creating condensation. And mold.
Make sure your dryer and bathroom fans vent completely to the house exterior, that you cover your pots with lids when cooking, and take shorter showers as needed. Eliminate any sources of moisture in the crawl space, basement, and attic. In more air-tight houses you may need to partially open a window at times, or add ceiling fans and a dehumidifier. Placement of fans or adding a ventilation system to allow forced convection can speed heat flow and help equalize heat in the adjoining rooms, helping to prevent cold spots and condensation from occurring.
When purchasing a home with electric heat check the rooms for any signs of mold and mildew. Likely spots for mold growth are windows and in the attic. Attics in houses with electric heat will need proper air sealing and ventilation in the attic to prevent mold growth and condensation.
Looking for Connecticut home inspection companies? Contact Allied Home Inspections LLC - "Inspected Once, Inspected Right!"